Skip to main content
MastercamTech Tip

How to mirror a part using Xform

By July 7, 2014No Comments
  • With your Mastercam part file open, select the geometry you wish to mirror
  • Open the Xform mirror tool by going to Xform>Mirror
  • With the mirror dialog box open, you have several options to choose from (I chose to copy about the Y axis)

Note: You also have the option to move, copy, or join entities.

Options include:

  1. Move, copy, join
  2. Mirror about the X or Y axis
  3. Mirror about an angle
  4. Mirror about a line
  5. Mirror about two points

 

  • Select “Ok” and verify that selected entities have been properly mirrored